GE Fanuc IC695CPE310 RX3i Mid Range Controller

 

Description

The IC695CPE310 CPU module is a GE Fanuc CPU from the RX3i PACSystems product line. Its processor is an Atom processor that has a maximum processing speed of 1 GHz. The IC695CPE310 CPU module comes with both SRAM and Flash memory, and it can store program data in its 10 MB uf user memory. The power requirements of the IC695CPE310 CPU module include 1 Amp of current at a backplane voltage rating of 3.3 Volts DC or 5 Volts DC, and 0.5 Amps at a backplane voltage rating of 24 Volts DC. When the RX3i PACSystems IC695CPE310 CPU module is installed in a complete RX3i PACSystems machine control system, it must be installed in the system's central universal backplane. This CPU cannot function properly if it is installed in an expansion backplane or a remote backplane.

Contains 10 Mbytes of user memory and 10 Mbytesof non-volatile flash user memory.

Battery-less retention of user memory.

Optional Energy Pack on system power loss powersCPU long enough to write user memory to nonvolatile storage (NVS).

Programming in Ladder Diagram, Structured Text,Function Block Diagram, and C.

Supports auto-located Symbolic Variables that canuse any amount of user memory.

Reference table sizes include 32Kbits for discrete %Iand %Q and up to 32Kwords each for analog %AIand %AQ.

Supports most Series 90-30 modules and expansionracks. For supported I/O, Communications, Motion,and Intelligent modules, see the PACSystems RX3iHardware and Installation Manual, GFK-2314.

The IC695CPE310 is a Central Processing Unit (CPU) module from the PACsystem RX3i product category. Also termed as controller or processor, the CPU's main function is to provide the logic execution, computation and communication capability to the system. Specific for the IC695CPE310, this CPU is built with a 1.1 GHz microprocessor speed with Boolean logic execution speed of 0.72 ms/k. It comes with multiple communication interface such as Two (2) serial ports composed of One (1) RS232 and One (1) RS485 port and One (1) Ethernet communication interface. The IC695CPE310 can accommodate up to 32 K bits of discrete Input and discrete output signals, referenced as %I and %Q in the program and 32 K Words of analog input and output capacity. Aside from this I/O memory capability, the IC695CPE310 is provided with a battery-backed memory amounting to 10 MB. The IC695CPE310 supports a variety of communication protocols. For the Ethernet port, supported protocol is SRTP at data transmission rate of 10/100 Mbaud with auto-negotiation capability. The serial interface on the other hand supports SNP, Serial I/O, Modbus Slave and Modbus Master protocols. Additional communication options available to this CPU are Serial, Genius, Reflective Memory using Control Memory Exchange (CMX) module and Ethernet while supported fieldbus of this controller are PROFINET, EGD, Modbus TCP Server and Client, Genius, Profibus DP and Ethernet. This CPU is downloaded with a user program and configuration that is engineered using the Proficy Machine Edition Logic Developer Machine Edition 7.0 SIM 3 or later software package.

Related words：ic695cpe310;GE Fanuc IC695CPE310;IC695CPE310 pdf;IC695CPE310 datasheet;manual IC695CPE310

Original new GE Fanuc IC695CPE310 is ready for shipment

Shipment

(1)Collect the goods by clients own account/shipping forwarder      (2)Global reach and speed: DHL/Fedex/TNT/UPS

Packing & Delivery

(1) Double packaged for international shipment   (2) Delivery time: 3-5 days

Payment

(1) We can accept wire transfer     (2) 100% T/T for stock items before shipping

Is GE Fanuc IC695CPE310 not the part you are wanting?

Check out the rest of our website to see what else we have to offer!