GE Fanuc IC697BEM711 Bus Receiver Module

Manufacturer: General Electric/GE
Part Number: IC697BEM711
Origin: USA
Condition: brand new
Delivery Time: 3-5 days
HS Code: 8537101190
Shipping Weight: 0.42kg
Payment Term: 100% bank transfer in advance
Technical documents, COO certificate support
Send Inquiry
Description
Product Introduction

The IC697BEM711 is a Bus Expansion module that is part of the Series 90-70 Programmable Logic Controller (PAC) series formerly manufactured by GE Fanuc Automation, now under Emerson Automation. This module has Two (2) communication interfaces with port 1 used as an expansion port for establishing a connection to the CPU or other BEM 711 and BEM 713 with a maximum cable length of 50 feet. The other port is used as an expansion port out for connecting to expansion racks or other BEM 711 modules. This expansion rack supports the installation of up to Seven )7) expansion racks.

IC697BEM711

Technical specifications for IC697BEM711

 

 

Brand GE Fanuc Slot required 1
Series Series 90-70 Module location Slot 1
Manufacturer GE Fanuc / Emerson Automation Port 1 function: Expansion port towards the CPU
Product Description Bus Expansion Module (BEM) Voltage input 5 Volts DC
Part Number IC697BEM711 Rack Addressing via Jumper settings
Series Series 90-70 Port 2 function: Expansion port away from the CPU
Slot width Single slot Current input 0.8 Amps
Product type Bus receiver module Voltage input 5 Volts DC
Part Number IC697BEM711 Terminating resistor: IC697BEM711
Mounting location Series 90-70 CPU baseplate Data connectors 2
Compatibility IC697 PLC Electrical Isolation Non-isolated differential communication
Product Description Bus receiver module No. of expansion racks Seven (7)
Status LED indicators Module OK; Last Rack; Bus Active Effective Data Rate 500 Kbytes/sec
Status LEDs OK, BUS Active, Last Rack Maximum cable length 50 feet (15meters)
Compatibility IC697 PLC terminator Plug IC697ACC702
No. of Ports Two (2) 25-pin D-shell connectors Data Rate 500 Kbytes/sec

 

product details

 

 

IC697BEM711 manual

The IC697BEM711 is a Bus Interface Module (BEM) that is used for implementing rack expansion. Specifically, this module is a Bus Receiver module. Utilization of this module allows installation of additional I/O and specialty modules and permits installation of up to Seven (7) expansion racks. This module has Two (2) communication interfaces, with port 1 used as an expansion port for establishing a connection to the CPU or other BEM 711 and BEM 713. The other communication interface is used as an expansion port out for connecting to expansion racks or other BEM 711 modules. The permitted between each BEM 711 or BEM 713 is 50 feet or 15 meters. The IC697BEM711 is not limited to rack expansion. System fault isolation can also be achieved as data transmitted to and from the communication cables are low-level signals representing the data available to an expansion rack. Troubleshooting and maintenance are also simplified as an expansion rack can be isolated for troubleshooting. Furthermore, output hold may also be implemented, enabling output modules of a failed or rack under maintenance to retain individual last state. This module is also provided with Three (3) stats LED indicators for indicating Rack OK, Last Rack, and Bus Active. This module is purely configured using the MS-DOS or Windows Programming software packages. The last expansion rack must be installed with a terminating resistor with catalog number IC697ACC702. This component is necessary to signal the end of the network and identify the last node of the expanded configuration. This module supports a transmission rate of 500 Kbytes/sec and a backplane current consumption of 800 mA.

 

Related words:ic697bem711;GE IC697BEM711;IC697BEM711 pdf;IC697BEM711 datasheet;IC697BEM711 manual;IC697BEM711 sell;IC697BEM711 GE

 

Global Co-Manufacturing Network

 

 

PLC Leader maintains strong, established partnerships with over 100 manufacturers worldwide, including leading industrial suppliers. Our extensive inventory encompasses a wide range of automation and control equipment, including (but not limited to):

  • DCS Components (Distributed Control System)
  • Programmable Logic Controller (PLC) Systems
  • Variable Frequency Drives (VFDs)
  • Servo Drives
  • Variable Speed Drives (VSDs)
  • DC Drives
  • General Automation Spare Parts
  • Human-Machine Interfaces (HMIs)

 

 

Is GE IC697BEM711 not the part you are wanting?

Check out the rest of our website to see what else we have to offer!

 

 

Want to know the price?

 

 

Telephone: +8618030175807     Email: sales7@apterpower.com

 

Disclaimer:

PLCleader sells new and surplus products and develops channels for purchasing such products. This website has not been approved or recognized by any of the listed manufacturers or trademarks.

PLCleader is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.