GE Fanuc IC693CHS391
The IC693CHS391 is a Series 90-30 component that is manufactured by GE Fanuc. This is a 10-slot Modular CPU baseplate. This baseplate hosts the CPU slot, non-CPU or I/O slots, Power supply and I/O expansion bus port. It also hosts the local electronic backplane to power the attached modules. Only One (1) CPU baseplate can be installed in a system, other baseplate permitted are expansion or remote I/O baseplate.
IC693CHS391 Specification
Module Type: CPU I/O Base- Baseplate Option: Main (with CPU slot)
- Distance: N/A
- Number of Slots: 10
- Dimensions: 17.44 x 5.12 x 5.59 in. (W x H x D)
- Internal Power Used: 420 mA @ 5 VDC
- Manufacturer: General Electric
- Series: 90-30
- Product Type: CPU I/O Base
- Baseplate Option: Main (with CPU slot)
- Number of Slots: 10
- Dimensions: 17.44 x 5.12 x 5.59 inches
- Internal Power Used: 420 mA at 5 VDC
- DIP Switch: Supported
- CPU Slot: Supported
- Enclosure Type: Open/None
- Connector: 25-Pin Female Connector
- Power Supply Module: Supported
The IC693CHS391 is a Modular CPU baseplate. This baseplate is part of the Series 90-30 that is manufactured by GE Fanuc. This device houses the connection ports, allowing modular CPUs, I/O modules and Power supply module installation. It has a total of Ten (10) slots with One (1) slot assigned to the CPU and Nine (9) slots for the I/O modules. Power supply slot is not included in the slot count as well as the bus expansion port. Since this is a modular CPU slot, it is by default assigned with a node address of 0 which can be modified through the programming software. Only One (1) modular CPU slot is supported by a system. Other slots in the system could be expansion or remote I/O baseplates. Power supply is installed to the left most slot which is not included in the counting of slots, allowing more I/O to be supported by this baseplate. CPU is installed only the Slot 1 as this slot is especially sized for CPU connection or special option module such as the FIP Bus Remote I/O scanner. Slot number 2 and higher are particularly sized for I/O or option modules. Expansion or remote I/O basesplate are connected through the expansion port at the right most portion of the baseplate. Depending on the CPU hosted by the IC693CHS391, up to Four (4) or Seven (7) expansion baseplates are supported by the IC693CHS391 Modular CPU baseplate. This baseplate supports panel mounting only, fastened by screws and washers through the mounting holes provided.
What is IC693CHS391?
It is an Expansion Plate developed by GE
Where should the power supply be installed on the plate?
The power supply should be installed in the slot at the left end of the baseplate, which is specifically sized to accommodate the power supply.
What is the purpose of the first slot on the baseplate?
The first slot, labeled CPU/1, is designated for the CPU module. Each system is allowed only one CPU baseplate.
Can multiple CPU baseplates be used in a single system?
No, each system can only have one CPU baseplate. Additional baseplates must be either Remote or Expansion baseplates.
What type of connector is used to link them to other baseplates?
Uses a 25-pin female connector located on its right end to connect to remote or expansion baseplates.
What are the cable length requirements?
For systems with remote baseplates, the required cable length should be less than 700 feet. For expansion and CPU baseplates, the cable length should be less than 50 feet.
Advantage GE series for option
- Fanuc CNC: A06B-0104-B111#7000
- GE 90-30 Series PLC: IC693CPU364 , IC693MDL330 , IC693PWR330 , IC693CPU374,
- GE 90-70 Series PLC: IC697ALG321 , IC697CMM741 , IC697CPU782 , IC697PWR711,
- GE Genius I/O: IC660BBD025 , IC660CBB902 , IC660EBS103, IC660ELB912G
- GE Mark VIe: IS215UCVEH2A , IS200EPCTG1A , IS200TRPGH2B , IS200DSPXH1D
- GE Multilin: VMIVME-7750-746000 , PQMII-T20-C-A , SR469 469-P5-HI-A20,
- GE PACSystems RX3i: IC695CPU315 , IC695CHS007 , IC695ACC402 , IC694MDL753B
- GE PACSystems RX7i: IC698CRE030 , IC698CPE020 , IC698PSA100 , IC698CPE010
- GE QuickPanel: QPI-3D200-S2P , QPI-3D200-E2P , QPI-31200-C2P
- GE Series One: IC610MDL116B , IC610CCM111A , IC610CPU105B
Who is PLC leader
We are a leading provider of innovative automation solutions, committed to enhancing industrial efficiency, productivity, and safety. With an extensive inventory of high-quality products, we ensure immediate availability and quick delivery to meet the diverse needs of our customers across various industries.
Is GE IC693CHS391 not the part you are wanting?
Check out the rest of our website to see what else we have to offer!
We accept inquiries 24 hours a day and send them to sales7@apterpower.com
