GE-Emerson IC698PSA350 RX7i PACSystems Power Supply Module
A 120/240 Volts AC or 125 Volts DC power supply module.
The GE-Emerson IC698PSA350RMN RX7i PACSystems Power Supply Module is designed to deliver +5 Volts DC, +12 Volts DC, and -12 Volts DC power, as well as logic-level signals, to devices and I/O connected to the RX7i backplane. Its modular design, characteristic of the RX7i series modules, enables insertion into Slot 0 of the main rack in the RX7i system.
The IC698PSA350 Power Supply Module is engineered to sustain consistent output power even during power losses lasting up to 1 AC input line cycle. It incorporates integrated safeguards against over-current, over-voltage, and electronic short-circuit situations. This module accommodates both AC and DC inputs and features power factor correction for efficient AC operation.
IC698PSA350 Specification
- Nominal Rated Voltage: 120/240 VAC or 125 VDC
- Input Voltage Range: 85 to 264 VAC or 100 to 150 VDC
- Input Power: 437 W
- Output Voltages: + 5 VDC, +12 VDC or -12VDC
- Module Type: Power Supply
- Rack Location: Slot 0 (Leftmost slot)
Features
- 120/240 Volts AC or 125 Volts DC
- 85 to 264 Volts AC (47 to 63 Hertz) or 100 to 150 Volts DC input voltage range
- 350 Watts output power
- 60 Amps maximum inrush rating
The IC698PSA350 is a power supply module that is part of the PACSystem RX7i platform, currently under Emerson Automation, formerly produced by GE Intelligent Platform (GE IP). This power supply mounts to an RX7i universal backplane. It has an input voltage range of 85 to 264 VAC 47 to 63 Hz and 100-150VDC and maximum input Power of 440 Watts, typical and 500 Watts, maximum. It has an output power of 350 Watts, maximum, total for all Three (3) outputs such as 5 VDC, 12 VDC and -12 VDC and output current of 0-60 Amperes, 0-12 Amperes and 0 - 4 Amperes, respectively.
The IC698PSA350 is a high capacity Power supply module from the PACSystem RX7i controller series. This module is used to deliver backplane power which is used by the modules to activate internal circuitry and become operable. This power supply module occupies a single slot of the chassis and designed to be installed only in the slot 0 of the RX7i rack. The IC698PSA350 operates at an input supply voltage of 85 to 264 VAC, 100-150VDC at an AC input frequency of 47-63 Hz. The nominal voltage rating of this module is 120 / 240 VAC and 125 VDC with input power requirement of 440 watts, typical and 500 watts, maximum. This power supply module has a power factor of 0.99 when used for AC input supply. The IC698PSA350 is a single slot power supply module that is installed to the leftmost slot of the RX7i rack or slot 0. It is provided with a variety of LED status indicators that helps identify the operational state of the module. These indicators include Field OK, OUTPUT OK and OVER TEMP LEDs. Built-in protection circuits such as Overtemperature and Overvoltage protection is provided to this power supply module as well as an Air flow Protection. A 70 CFM forced air cooling fan is available below the system chassis which supplies cooling air to the power supply module. If cessation of air flow is detected, the OVER TEM LED indicator actuates. The IC698PSA350 power supply is available in series A and Series B version. Series A power supply is internally installed with 0.25" x 1.25" fuses while series B power supply has 5 x 20 m fuse. Installed fuse is 8A/250V fuses.
IC698PSA350A IC698PSA350-A, Series A, Rev A
IC698PSA350C IC698PSA350-C, Series C, Rev C
IC698PSA350D IC698PSA350-D, Series D, Rev D
IC698PSA350E IC698PSA350-E, Series E, Rev E
What are the protective limits available to the IC698PSA350?
The IC698PSA350's protective limits are ride through and holdup time with duration of 15 ms and 5 ms, respectively.
What is the operating temperature of the IC698PSA350?
The IC698PSA350 power supply has operating temperature of 0degrees C to 60degrees C (32degrees F to 140degrees F).
What are the Inrush current rating of the IC698PSA350?
Inrush current rating are 30 A @ 115 VAC and 60 A @ 230 VAC with inrush current duration of 100 ms.
What is the output power of the IC698PSA350?
The IC698PSA350 has an output power of 350 Watts.
What is the cooling method used by this high-capacity power supply?
The IC698PSA350 uses a 70 CFM forced air cooling fan.
What are the protection features available to the IC698PSA350?
The IC698PSA350 has an overcurrent and overvoltage protection as well as an air flow protection.
Advantage GE series for option
- Fanuc CNC: A06B-0104-B111#7000
- GE 90-30 Series PLC: IC693CPU364 , IC693MDL330 , IC693PWR330 , IC693CPU374,
- GE 90-70 Series PLC: IC697ALG321 , IC697CMM741 , IC697CPU782 , IC697PWR711,
- GE Genius I/O: IC660BBD025 , IC660CBB902 , IC660EBS103, IC660ELB912G
- GE Mark VIe: IS215UCVEH2A , IS200EPCTG1A , IS200TRPGH2B , IS200DSPXH1D
- GE Multilin: VMIVME-7750-746000 , PQMII-T20-C-A , SR469 469-P5-HI-A20,
- GE PACSystems RX3i: IC695CPU315 , IC695CHS007 , IC695ACC402 , IC694MDL753B
- GE PACSystems RX7i: IC698CRE030 , IC698CPE020 , IC698PSA100 , IC698CPE010
- GE QuickPanel: QPI-3D200-S2P , QPI-3D200-E2P , QPI-31200-C2P
- GE Series One: IC610MDL116B , IC610CCM111A , IC610CPU105B
Who is PLC leader
We are a leading provider of innovative automation solutions, committed to enhancing industrial efficiency, productivity, and safety. With an extensive inventory of high-quality products, we ensure immediate availability and quick delivery to meet the diverse needs of our customers across various industries.
Is GE IC698PSA350 not the part you are wanting?
Check out the rest of our website to see what else we have to offer!
We accept inquiries 24 hours a day and send them to sales7@apterpower.com
