Prosoft PTQ-PDPMV1 Interface Module

Product Overview

The PROFIBUS DPV1 Master module is a powerful communication interface for Quantum® processors. Developed under license from , the module incorporates proprietarybackplane technology that enables powerful data exchange with processors.The module supports complete Master specifications according to IEC 61158. Acyclicparameter data can be transferred with Class 1 or Class 2 DPV1 services, allowingprocessors to easily communicate with slave devices supporting PROFIBUS DPV0/V1protocol.The module acts as an input/output module between the PROFIBUS network and theprocessor. Data transfer from the processor is asynchronous with the I/O data transfer onthe PROFIBUS network.

• Single slot - Quantum backplane compatible

• The module is recognized as an Options module and has access to PLC memoryfor data transfer

• Configuration data is stored in non-volatile memory in the ProTalk® module

• Configuration software for Microsoft Windows XP, 2000 and NT is included with themodule

• Up to six modules can be placed in a rack

• Local rack - The module must be placed in the same rack as the processor

• Compatible with all common Quantum programming packages, including Concept(version 2.6 or higher), Unity Pro (version 2.2 or higher), ProWORX (version 2.20 orlater) (HSBY only available with Unity Pro environment)

• Quantum data types supported: 3x, 4x

• High speed data transfer across the backplane provides quick data update times

• Sample ladder file available

• Easy-to-use drag and drop Busview configuration interface via ProSoftConfiguration Builder software (see PSW-PCB Datasheet)

• Monitoring and modification of process data and DPV1 acyclic data with onlineslave diagnostics

• Supports PROFIBUS PA slaves on the network through DP/PA coupler or link

• Supports up to 125 slave devices with repeaters

• Supports extended diagnostic data (DPV1)

• Supports all standardized baud rates, up to 12 Mbits/s

• Auto baud detection at all valid PROFIBUS DPV1 rates

• Supports PROFIdrive 3.1 compliant parameter read and write operations

• Supports Sync and Freeze commands

• Alarm indications and confirmations handling (DPV1)

• Supports Multicast and Broadcast telegrams (DPV1)

• CRC checksum determination of slave configuration consistency to processor

• FDT/DTM PROFIBUS Master transport communication DTM software included(Product Number PSW-CDTM-PDPM)

• Hot Standby features support the SE 140 671 CPU

• Supports up to six PTQ-PDPMV1 Hot Standby modules per rack

• Diagnostic and status words are provided for Active Primary and PassiveSecondary Master health status

• PROFIBUS switchover time will be nominal 100 ms not to exceed 300 milliseconds

• Cable break detection with segmented network slave quantity information

• PROFIBUS health messages are generated from secondary Master via FDL pingservices

• No setup parameters required. Module automatically detects Hot Standby system

keywords: ptq pdpmv1;Prosoft PTQ-PDPMV1;PTQ-PDPMV1 pdf;PTQ-PDPMV1 datasheet;PTQ-PDPMV1 manual;PTQ-PDPMV1 new

Is Prosoft PTQ-PDPMV1 not the part you are wanting?

Check out the rest of our website to see what else we have to offer!

--Vicky

✉ sales7@apterpower.com