GE Fanuc IC693MDL940 Series 90-30 Relay Output Module

Description

The IC693MDL940 is a GE-Fanuc 90-3- Series Programmable Logic Controller (PLC) module. This module is a Relay Output module that is designed with Four (4) groups of Four (4) output channels each, total of Sixteen (16) output channels. Each channel of this relay output module is in form of a Normally Open (NO) contact with a maximum current capacity of 2 Amperes pilot duty per output channel while the maximum output capacity per common is 4 Amperes with minimum load of 10 mA.

Vicky--sales7@apterpower.com

The IC693MDL940 module is an GE Fanuc manufactured relay output module. It is a 16-point output module variant with a voltage rating of 120/240 Volts AC. It is a Series 90-30 module that is used for controlling output loads. It has an output switching capacity of 2 Amps of relay current. There are 4 groups of 4 output points each. Each of these 4 groups has a common power output terminal. This industrial relay unit controls a wide variety of load devices including solenoids, indicators, and motor starters. The IC693MDL940 module is able to handle 15 bits of output data from the host controller CPU. It can be configured BY using the Proficy Machine Edition configuration software. The relay circuit is powered through the backplane with a 24 Volts DC source.

The IC693MDL940 module is compact in size and it has a small footprint. This output module has an open enclosure and should be used for indoor applications only. The maximum operating temperature should not exceed 60 degrees Celsius for regular operation. The IC693MDL940 module comes with 1500 Volts of isolation between the field side and the logic side, and 500 Volts of isolation between groups. The relay output module can take a maximum load of 4 Amps maximum current per common. The minimum total load current is 10 Amps and the maximum inrush current is 5 Amps. The on and off response time of the module is 15 milliseconds. The initial power consumption rating of the module is 7 milliamps with 5 Volts DC voltage from the bus on the backplane, and it is 135 milliamps with 24 Volts DC voltage from the bus on the backplane.

Related words：ic693mdl940;ge ic693mdl940;IC693MDL940 pdf;IC693MDL940 datasheet;IC693MDL940 manual;IC693MDL940 sell

Partner with us for reliable access to a comprehensive inventory of new, original PLC and DCS components. We specialize in sourcing top brands like Allen Bradley, Bently Nevada, Honeywell, and ABB, ensuring you overcome supply chain challenges with speed and efficiency. Our commitment to quality and customer satisfaction has established us as a trusted supplier, serving over 50 countries globally.

Is GE IC693MDL940 not the part you are wanting?

Check out the rest of our website to see what else we have to offer!

sales7@apterpower.com // Call or Whatsapp: +8618030175807