Which Power over Ethernet Solution is Right for Your Network?

Sep 21, 2024 Leave a message

A brief history
In the 1990s, prior to the IEEE stepping in, "power injection" was the label used to describe the concept of supplying electricity over an Ethernet cable. So-called "power injectors" had no intelligent protocol or safety considerations. They only worked by supplying power over Ethernet, either AC or DC current, utilizing the spare pairs that 100Base-TX Ethernet did not use. In doing so, power injectors basically emulated how traditional PSTN (public switched telephone network) landline phones operate.

Standardizing PoE was first proposed by the IEEE 802.3 Working Group in 1999. The group's original standard-IEEE 802.3af-was ratified in 2003, thus ensuring interoperability across a broader range of connected devices.
IEEE 802.3af established a uniform, safer way to deploy PoE. It defined powered devices (PDs) as equipment that received power and power sourcing equipment (PSE) as those that supplied power. PDs and PSEs would operate within a voltage range of 44-57V with a maximum power output of 15.4W per port. Power could be sent to a PD using two of the four twisted pairs that are available in typical Category 5 (Cat 5) cable by pins 4 and 5 or pins 7 and 8, or by data using four twisted pairs by pins 1 and 2 or pins 3 and 6.

Notably, the IEEE 802.3af standard included a mechanism to protect connected devices that do not support PoE. Specifically, a 25-kW resistor is placed in between the power pairs of the powered device so that transmit power is only supplied by the power source if something close to that resistive value is detected.

 

Increased power demands

As mentioned earlier, IEEE 802.3af specifies a maximum output of 15.4W per port. However, in instances of cable power loss, the minimum guaranteed power available at the PD is only 12.95W per port. While that is plenty of power for simple devices, it falls short of the power and consumption needs of new higher wattage devices being deployed in Industrial Internet of Things (IIoT) applications.

To remedy this situation, the IEEE 802.3 Working Group approved IEEE 802.3at in 2009. This PoE standard featured a new power class that could deliver up to 30W on the port and maximum guaranteed power of 25.5W to a PD. Although this altered the existing standard, IEEE 802.3at still supplied power over two pairs and topped out at a safe 57V port voltage. IEEE 802.3at allowed for high power on-hungry devices, such as pan/tilt/zoom cameras, alarm systems and wireless access points, to be powered by a nearby PoE-enabled industrial Ethernet switch or other power sourcing equipment (PSE). IEEE 802.3at is also backward compatible with the original standard.

The newest PoE standard, IEEE 802.3bt: Type 3- 45W or 60W (PSE) / 51W (PD); Type 4- 90W (PSE) and 71.3W (PD), was ratified in 2018. IEEE 802.3bt was designed to stay ahead of power demands since there simply aren't many devices on a network that need more power than 90W in PoE delivery today.
Unlike previous standards, IEEE 802.3bt focuses on using all four twisted-pair cables within a single cable or standard Ethernet cable rather than two. The standard includes support for 2.5GBASE-T, 5GBASE-T, and 10GBASE-T, while previous PoE standards have a maximum speed of 1 Gbps.

Because of IEEE 802.3bt, the ongoing shift to Ethernet-based industrial control systems and the merging of IT and data lines in OT (operations technology) networks is certain to be accelerated. Having data and 90W PoE supplied by a single Ethernet connection is ushering in a new era for industrial networks.

 

9211

 

Our hot selling products:HIMA F3330;GE Multilin SR750-P5-G5-S5-HI-A20-R;Bently Nevada 3500/15;ABB SPDSI14;ICS TRIPLEX T8431;Honeywell FC-TSDI-1624;Bently Nevada 330180-51-CN.......

 

Contact our manager for a beautiful price

Vicky Email: sales7@apterpower.com

Call or Whatsapp: +8618030175807

Skype: live:2435aba439730baa

 

Disclaimer:

PLCleader sells new and surplus products and develops channels for purchasing such products. This website has not been approved or recognized by any of the listed manufacturers or trademarks.

PLCleader is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.