Prosoft MVI56-PDPMV1 Technology PROFIBUS DP-V1 Master Network Interface Module

Manufacturer: Prosoft / Allen Bradley
Part Number: MVI56-PDPMV1
Origin: USA
Condition: brand new
Delivery Time: 3-5 days
HS Code: 8537101190
Shipping Weight: 0.3kg
Payment Term: 100% bank transfer in advance
Technical documents, COO certificate support
Send Inquiry
Description
MVI56-PDPMV1

Product Overview

The MVI56-PDPMV1 is a Profibus DP V1 Master communication module. This module is used with the ControlLogix platform manufactured by encompass partner company, Prosoft Technology. It is a single slot module with One (1) RS485 optically isolated PROFIBUS interface supporting DP V1. It connects up to 125 Slave devices, compatible for use with PROFIBUS repeaters. It has LED status indicators and One (1) Debug / Config port.

Technical specifications for MVI56-PDPMV1

 

 

Product Type PROFIBUS DPV1 Master communication module
Backplane Current Load 800 ma @ 5V; 3 mA @ 24VDC
Manufacturer Prosoft Technology
Compatible Platform ControlLogix
Compatible Controllers ControlLogix Processors
Brand Allen-Bradley
Mode of operation PROFIBUS Master
Compatible PROFIBUS version Version 1
No. of slave devices 125 devices
No. of Ports Two (2) ports; CFG / Debug / RS485 optically-isolated
Module width Single Slot
Operating Shock 30 g
Operating Vibration 5 g @ 10…500 Hz
LED indicators Module Status Backplane Transfer Status Application Status Serial Activity Error LED Status
Relative Humidity 5% to 95% (non-condensing)

 

Description

 

 

Allen Bradley MVI56-PDPMV1

The MVI56-PDPMV1 is an ControlLogix platform compatible module. This module is a Profibus DP V1 compatible module that acts as the Master device in the Profibus network. This module is developed by Prosoft Technology, an encompass partner company of Rockwell Automation that develops Allen-Bradley PLC compatible modules.

The MVI56-PDPMV1 features One (1) RS485 port that is optically isolated, supporting PROFIBUS DP Version 1 protocol. Up to 125 PROFIBUS slave devices can be connected to this port which is also compatible with PPROFIBUS repeaters. This module has the capability of being configured up to 1536 cyclic bytes and 1536 bytes of output and supports extended diagnostic data.

Other functions supported by the MVI56-PDPMV1 include Alarm Handling, Synch and Freeze commands, Supports PROFIDrive version 3.1 parameter read and write operations, multicast and broadcast telegrams.

The MVI56-PDPMV1 has embedded LED status indicators for depicting the state of operation of the module. These LEDs indicators include Ready, Run, Error and Token indicators.

The MVI56-PDPMV1 PROFIBUS communication module is installed to a 1756 ControlLogix chassis. It occupies a single slot of the chassis and draws a current amounting to 800 mA @ 5VDC and 3 mA @ 24VDC from the backplane. It has an operating temperature of 0°C to 60°C (32°F to 140°F) and storage temperature of -40°C to 85°C (-40°F to 185°F). This module must be installed in an appropriate enclosure with vibration not exceeding 5 g from 10 Hz to 150 Hz and shock of 30 g with relative humidity of 5% to 95%, non-condensing.

 

System Requirements

 

 

The MVI56-PDPMV1 module requires the following minimum hardware andsoftware components:

  • Rockwell Automation ControlLogix processor, with compatible power supplyand one free slot in the rack, for the MVI56-PDPMV1 module. The modulerequires 800 mA of available power.
  • Rockwell Automation RSLogix 5000 programming software version 2.51 orhigher
  • Rockwell Automation RSLinx communication software
  • Pentium® II 450 MHz minimum. Pentium III 733 MHz (or better)recommended
  • 128 Mbytes of RAM minimum, 256 Mbytes of RAM recommended
  • 100 Mbytes of free hard disk space (or more based on applicationrequirements)
  • 256-color VGA graphics adapter, 800 x 600 minimum resolution (True Color1024 x 768 recommended)
  • Dial-up Internet connection (Broadband connection recommended)
  • Approved PROFIBUS cabling and connectors
  • Small flat blade screwdriver to secure the PROFIBUS connector to themodule

 

keywords: prosoft mvi56 pdpmv1;mvi56 pdpmv1;MVI56-PDPMV1 pdf;MVI56-PDPMV1 datasheet;MVI56-PDPMV1 manual;MVI56-PDPMV1 sell

 

Inventory Stock

 

 

ALLEN-BRADLEY ABB BENTLY NEVADA Schneider
1794-OB8EP TU532-XC 1SAP417000R0001 3500/22M 288055-01 140CPU65150C
1794-OE4 TU810V1 3BSE013230R1 3500/32M 149986-02 140CPU65160S
1794-OF41 TU811V1 3BSE013231R1 3500/33 149986-01 140CPU67060
1794-PS1 TU812V1 3BSE013232R1 3500/40M 140734-01 140CRA21220
1794-TB2 TU818V1 3BSE069209R1 3500/40M 176449-01 140CRA93100
1794-TB3G TU831V1 3BSE013235R1 3500/60 163179-01 140CRP93100
1794-TB3S TU840 3BSE020846R1 3500/62 163179-03 140CRP93200C

 

 

Is Prosoft MVI56-PDPMV1 not the part you are wanting?

Check out the rest of our website to see what else we have to offer!

 

 

Send an inquiry to get a free quote

 

 

--Vicky

sales7@apterpower.com

 

Disclaimer:

PLCleader sells new and surplus products and develops channels for purchasing such products. This website has not been approved or recognized by any of the listed manufacturers or trademarks.

PLCleader is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.