Bently Nevada 330901-05-65-05-11-05 3300 XL NSv FluidLoc Proximity Probe

Bently Nevada 330901-05-65-05-11-05 — 3300 XL NSv 1/4-28 UNF proximity probe without armor.
✓ Original Product Verification✓ Ready Stock Check✓ Exact Model Review✓ 24-Hour Online Quotation
Send Inquiry
Description
BENTLY NEVADA PRODUCT INFORMATION

330901-05-65-05-11-05

Bently Nevada 330901-05-65-05-11-05 3300 XL NSv FluidLoc Proximity Probe

330901-05-65-05-11-05 is a 3300 XL NSv 1/4-28 UNF probe without armor, configured with a 0.5 in unthreaded length, 6.5 in case, 0.5 m FluidLoc cable, connector protector and Multiple Approvals. Every value below is tied to this complete ordering code and is not copied from a similar suffix.

Confirmed Product Information

ManufacturerBently Nevada, a Baker Hughes business
Probe family 3309013300 NSv probe, 1/4-28 UNF-2A thread, without armor
Unthreaded length option 050.5 in
Overall case length option 656.5 in
Total length option 050.5 m (20 in)
Connector and cable option 11Miniature coaxial ClickLoc connector with connector protector; FluidLoc cable
Agency approval option 05Multiple Approvals
System linear range1.5 mm (60 mil) in a matched 3300 XL NSv system
Incremental scale factor7.87 V/mm (200 mV/mil), +12.5% / -20% including interchangeability error
Frequency response0 to 10 kHz, +0 / -3 dB typical
Probe pressure sealViton O-ring; probes are not pressure-tested before shipment
System lengthsMatch probe plus 330930 extension cable to a 5 m or 7 m 330980 Proximitor sensor system

Applications

1
Radial vibration and radial-position measurement where the smaller NSv probe package is required.
2
Keyphasor and speed measurement in a documented 3300 XL NSv system.
3
Installations requiring FluidLoc cable and connector protection on an unarmored 1/4-28 probe.

Confirmed Compatibility And Installation Conditions

✓
Keep the 330901 family distinct from armored 330902 and metric 330903/330904 families.
✓
Use a 4.5 m extension cable with this 0.5 m probe for a 5 m system, or a 6.5 m extension cable for a 7 m system.
✓
Option 11 specifies FluidLoc cable with a connector protector; do not substitute the standard-cable option without review.
✓
The Viton O-ring seal is not pressure-tested before shipment; verify application pressure and chemical compatibility.
✓
Confirm the Multiple Approvals marking and the applicable safe-installation drawing for the destination.

Lifecycle And Replacement Guidance

The current manufacturer datasheet lists the 330901 ordering family and does not state that 330901-05-65-05-11-05 is discontinued. It does not identify a universal direct replacement for this complete code.

Frequently Asked Questions

Which extension cable matches 330901-05-65-05-11-05?

Use 4.5 m for a 5 m NSv system or 6.5 m for a 7 m NSv system, with the matching 330980 Proximitor sensor and required connector/cable option.

Is 330901-05-65-05-11-05 armored?

No. Family 330901 is the 1/4-28 UNF probe without armor; option 11 specifies FluidLoc cable and connector protection, not stainless-steel armor.

What does option 11 mean on 330901-05-65-05-11-05?

It specifies a miniature coaxial ClickLoc connector with connector protector and FluidLoc cable.

Can 330901-05-65-05-11-05 replace a standard 3300 XL 8 mm probe?

No direct probe-only substitution is confirmed. The NSv system has a different mechanical package and must use compatible NSv extension cable and Proximitor sensor.

Which pressure check applies to 330901-05-65-05-11-05?

The probe uses a Viton O-ring pressure seal but is not pressure-tested before shipment; confirm the installed pressure and process compatibility.

Model Identification

Use the complete identifier 330901-05-65-05-11-05. Hyphen placement, zero padding and every suffix field are significant; compare the full nameplate and purchase record before ordering.

Manufacturer References

Bently Nevada 3300 XL NSv Proximity Transducer System Datasheet, document 147385 Rev. R.

Browse Bently Nevada products  |  Request a quote for this exact model

About PLC Leader

www.plcleader.com

PLC Leader provides sourcing support for current, surplus and hard-to-find PLC, DCS, drive, safety and condition-monitoring components used in industrial maintenance.

For every RFQ, our team checks the complete part number, requested condition, available documentation and order requirements before confirming supply terms.

Learn More About PLC LeaderSubmit an RFQ

PLC Leader team supporting 330901-05-65-05-11-05 industrial product sourcing

Recommended Models

These models are selected from reference lists supplied to PLC Leader and are shown for sourcing discovery only. They are not presented as direct replacements for the product described on this page. Confirm the complete manufacturer and part number before ordering.

1LA7133-4AA90ZN24RXSF1‑110‑125VLC1 F115
TXM1.6RPLC-BSC-24DC/21Beckhoff KL2134
Siemens 6SY7010-0AB08PC-301203-426-1180
ABB SACE EMAX E2 S 1600,1SDA056009R1EM50 2200-48890-025ABB TA25DU2.4 1SAZ211201R1028
MB1301XABB DO571 A0 -1TNE968902R2202Analog Devices 5B47-B-11
SM‑025SG200-50ABB 1SDA067414R1
D1082DMDAF2, 16089412.SGDMPHCPS.9-5008WITRR832-001
CWSS-RB-W7248RANAHT-9000-UD1
9251-2-103‑LRMF1746-OB32 SLC500
G12MFS/HP/NA 10000PSIAL A10V O140ED 72/31R-VSC12K68P-S0413 R9025164883718B004
1.1400.0.10EGC-HD-220-1000-TB-0H-GK 556824DAWE D‑1422C
ER71I-6KN.H7.1RABB ACS550-01-180A-4PTL‑11‑427
S8VK-S24024SC8551A005MS.24/DCMerten 648493
Few-K4A5VBTXA207DCLV422-0010
5004TNM3440F2000PS-21
N3511RA-M2CDG 110 036 R0011EVD0000UC0
1LE1043-1DA29-0JB4-ZRVP261756-CNBR
2CDG1101120R0011FRS-R-200Model2 71900
VROM-101VAZ-2FK-G10-BRIDGE 2160263BA23266AAAA
PXC50-ED S55372-C110Crestron ST‑SPL 6500474ZE544-005A-840

Hot Tags: Bently Nevada 330901-05-65-05-11-05, 330901 NSv FluidLoc probe, 1/4-28 NSv probe quote, 3300 XL NSv replacement review, FluidLoc proximity probe sourcing, Bently Nevada 330901 RFQ, hardness testing equipment, infrared camera for industry, motor controllers, non destructive testing equipment, predictive analytics for maintenance, turbine monitoring

Disclaimer:

PLCleader sells new and surplus products and develops channels for purchasing such products. This website has not been approved or recognized by any of the listed manufacturers or trademarks.

PLCleader is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.